Autocad-KB

BS EN17037 Illuminance (SDA) Criteria Illuminance Criteria UK National Annex The UK Annex is intended for "hard to light" dwellings. The illuminance targets for BS EN17037 SDA can be accessed via Project Settings Climate Daylighting tab. The target Lux is...

BREEAM Daylight Factor Criteria Terms and Definitions Average Daylight Factor The average daylight factor is the average indoor illuminance (from daylight) on the working plane within a room,expressed as a percentage of the simultaneous outdoor illuminance on a horizontal plane...

 Open cutback dialog by entering MBSCutback command or By pressing the Cutback icon on the mbs tool bar. Select group Select Sky type. For ROL cutback Sky should be set to Uniform. Orientation is the surface orientation where the calculation...

Register by Model FAQs What layer names are used by Register by model to detect the polylines? The Register Model section - Layers tab shows list of all the layer names. Create Registration Layers button creates all the required layers...

Renumbering can be useful if windows and rooms are added or removed from the model after the initial registration. It can also be useful if the numbering of the windows needs to start from a different position. Renumbering can be...

List Of Layer Names Room: Room_Polylines (Can also use Room_Polylines_Bedroom or Room_Polylines_Living Room to specify room type during registration) Window: Window_Polylines Building Outline: Building_Polylines Building Detail Block: Building_Polylines Extra Building Outline: Building_Sub_Polylines Building Detail Block Click on Insert Building Block...

Installation Licensing Register By Model Register FAQs Renumbering Windows/Rooms Cutback Material Settings Legend Settings Raytracing Settings Calculation FAQs Daylight Factor Climate Based Calculations BREEAM V7 Calculations SDA Calculation With Trees Part O Simplified Method ROL DF Sunlight Exposure Glare Analysis...