Floorplans

Applies to Trimble® S Series instruments from the S5 and above. There are 5 stages to getting connected to a Trimble S series instrument: Lesson 2 – Stage 1: Obtaining and installing a Trimble SDK License for your Windows Mobile...

MBS Floor Plans software is setup to enable the establishment of internal control if required; for example to establish a new control point from existing control or previously measured detail and to orientate a total station to existing control to...

This topic covers the Floorplans tools that have different or specific functionality for use with total stations including: Fillet Wall Tool Symbols Beams Spot Levels The lessons in this topic assume a total station is connected to Floorplans, a station...

Scenario: The ‘Add Recess’ tool allows the measurement of complicated shaped rooms to be simplified, it is specifically for symmetrical additions either into the room such as a chimney breast or column or out of the room such as a...

The ‘Add Recess’ tool is available for rooms that have been closed/ended. It allows the measurement of complicated shaped rooms to be simplified although there will be instances when it is best to use a total station or measure with...

Scenario: In the Garden room we are going to add a staircase with 2 straight sections, a quarter turn landing and winder. Each section of the staircase is dealt as a separate entity, starting with the standard straight staircase, following with...

Note: All lessons are recorded with manual text entry for any measured values, for stairs the procedure is the same when using a Laser Measurement Device, but please refer to Topic 3a – Lessons 2 and 4 for measurement specific...

The ‘Add Beam’ tool is available for rooms that have been closed/ended and enables the addition of beams from 2 different walls, the beams can be perpendicular to the wall or at an angle. A beam can be extended to...